54MIL BLAZEFRAME® SHIELD SYSTEM
ClarkDietrich’s BlazeFrame Shield is specifically designed to meet the requirement of horizontal fire blocking inside the wall system and between floor levels. BlazeFrame Shield system simply installs by twisting into stud flanges and screwing into stud webs. The one piece preformed assembly eliminates cutting, notching and attaching clips.
- Installs quickly and easily without clips
- Available for 24" stud spacing
- Three available widths
- 54mil (16ga)
- Pre-notched for use on structural studs
PRODUCT DATA & ORDERING INFORMATION:
| Thickness | ||
| 33mils (20ga STR) | 0.0346” design thickness, 0.0329” minimum thickness | |
| 43mils (18ga) | 0.0451” design thickness, 0.0428” minimum thickness | |
| 54mils (16ga) | 0.0566” design thickness, 0.0538” minimum thickness |
| Yield Strength: | 33ksi for 33mils & 43 mils, 50ksi for 54mils |
| Coating: | CP60 |
DIMENSIONS:
Horizontal leg: 1”
Connection tabs: Top: 2”, Bottom: 1-1/2”
Width: 3-5/8”
Lengths: For 24”o.c stud spacing
ASTM & CODE STANDARDS:
- Structural framing is produced to meet or exceed ASTM C955
- Galvanized sheet steel meets or exceeds requirements of ASTM A1003
- SDS & Product Certification Information