Black-Iron Patch easily installs using standard drywall compounds and corrects cutouts that were made too large. Black-Iron Patch will not fuzz-up during sanding.
- Pre-cut to fit standard sprinkler pipes
- Repairs and reinforces mis-cut or damaged areas around sprinkler pipe holes
- Install in areas where patching cutouts were made too large
- Sprinkler pipe relocation
PRODUCT DATA & ORDERING INFORMATION:
| Product code | Size | Hole Size | Type | PCS/Case | Cases/Pallet |
|---|---|---|---|---|---|
| BP-100 | 4-1/2" dia. | 1-3/8" dia. | 20 count bag | 5 bags of 20 | 24 |
INSTALLATION
- To apply, lightly sand area to be repaired.
- Apply drywall compound 1/8”-1/4" thick directly to back of patch.
- Place patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim-coat patch and let dry.
- Apply second coat, let dry, and sand.
- Compound that remains on backside of Head-Patch makes patch very rigid in the damaged area.
- REPAIRS OVER PAINTED SURFACES - recommend the use of Strait-Flex Super-Bond mixed with all-purpose joint compound to enhance bondability.
CODE APPROVALS & PERFORMANCE STANDARDS
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
STORAGE
- All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level
platform, and protected from weather and moisture.