Easily installs using standard drywall compounds. Can-Patch will not fuzz-up during sanding.
- Pre-cut to fit standard commercial ceiling lights
- Repairs and reinforces mis-cut or damaged areas around ceiling lights and can light holes
- Install in areas where patching cutouts were made too large
- Ceiling lights and can light relocation
PRODUCT DATA & ORDERING INFORMATION:
| Product code | Size | Hole Size | Type | PCS/Case |
|---|---|---|---|---|
| CPC-100 | 11" | 8" dia. | 100 count Case | 10 bags of 10 |
INSTALLATION
- To apply, lightly sand area to be repaired.
- Apply drywall compound 1/8”-1/4” thick directly to back of patch.
- Place patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim-coat patch and let dry.
- Apply second coat, let dry, and sand. Compound that remains on backside of Can-Patch makes patch very rigid in the damaged area.
CODE APPROVALS & PERFORMANCE STANDARDS
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
STORAGE
- All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level
platform, and protected from weather and moisture.