L-Bead on a roll that performs like conventional L-Bead.
- Window returns, sky lights, and wall edges
- Produced for drywall thickness of 1/2” standard and 5/8”
- Note: Full composite materials, not paper-faced
PRODUCT DATA & ORDERING INFORMATION:
| Product code | width (in) | length (ft) | Rolls/Case | Cases/Pallet |
|---|---|---|---|---|
| LB12-100, LB58-100 | 2-1/4" | 100' | 12 | 24 |
INSTALLATION
- Cut L-Bead to desired length. Fold L-Bead in half at center crease with print size facing each other.
- Apply all-purpose compound to corner. Press L-Bead into the wet compound, adjust to create a straight line, and wipe down with a taping knife.
- A second coat can be applied immediately. Let dry completely over several hours or overnight.
- With a 6” or 8” taping knife, apply your final coat of compound feathering the compound beyond previous coat. Let dry completely over several hours or overnight.
- Sand lightly with 120 grit sandpaper. L-Bead will not fuzz-up like paper or mesh tapes.
CODE APPROVALS & PERFORMANCE STANDARDS
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
STORAGE
- All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level
platform, and protected from weather and moisture.
