Roll patch easily installs using standard drywall compounds. The patch material is imprinted with standard receptacle patterns for easy trimming. Roll-Patch will not fuzz-up during sanding.
- Continuous roll patch allows material to be cut to any length
- Imprinted with standard electrical outlet patterns to make repairs easy
- PVC fiber composite material
- Drywall damage
- All patching applications
PRODUCT DATA & ORDERING INFORMATION:
| Product code | Width | Length | Wholesale Case | |
|---|---|---|---|---|
| Rolls/Case Pack | Cases/Pallet | |||
| RP5.5 x 20-6, RP5.5 x 100-4, RP11 x 20-6, RP11 x 50-1 | 11" | 50' | 1 | |
INSTALLATION
- Cut patch to desired dimensions.
- Prepare surface by cleaning and lightly sanding area around receptacle.
- Apply 1/4" of quick set or drywall compound directly to back of Roll Patch.
- Flip over patch and position Roll Patch over center of repair and wipe down flat to wall using joint knife.
- Immediately skim coat edges of patch and let dry. Compound that remains on back side of Roll Patch in damaged or mis-cut areas makes Roll Patch very rigid.
- Apply second coat. Let dry and sand. Roll Patch will not fuzz up during sanding.
CODE APPROVALS & PERFORMANCE STANDARDS
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS Strait-Flex - Joint Tape For Joint Tape
STORAGE
- All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level
platform, and protected from weather and moisture.